Monthly Archives: April 2017

[G] Luna Injector V-1.3

This tool is equipped with specific tutorials which make your connection is unlimited.  Our tool has been tested before.  We are sorry if there are no successful use of our tools. We just want to share. There is no risk of using tools from us, but if anything, the risk is only a matter of success or not success of his course using our tools.

This tool includes some hosts, including: Luna Jabar and Luna Non Jabar. Probably, work for Ajis 0p0k also.  Just try it one by one which host that work in your location. This inject support for SSH and VPN. It’s also support original proxy or squid proxy.  For now, these inject just work for our account from GlobalSSH only.  You can’t use this inject with another account from another SSH Provider.  🙂

When you are finished extracting this file, please read our notepad first (readme.txt).  You can found important information about this inject in our notepad.  So, don’t forget to read our notepad first which included in this file. When you open this inject, please see the tutorial tab. It may help you when you want to use this inject. Our default listen port is 100. Our entire tools has been set like that. You must remember it to avoid wrong setting.

Screenshot Tool:

 

 

 

 

 

 

We’re sorry, all of our tools which available on this site, have to use a password rar or HWID.  We have a purpose why we have to do this.  It does because, we don’t want this inject being reupload on another site.

How to get the password or HWID?
If you want to know about the password or HWID of this inject, you can contact us via facebook message to this account: fb.me/dikaputrileo.      We have to say sorry if we can’t reply your message shortly after your message sent to us.  We can’t online in facebook for 24 hours of course.  But, we promise we’ll reply all of the message which sent to us.

Below are the download link for this tool:
[G] Luna Injector V-1.3

 

HNH Config Luna Jabar ^ for V-4.1

Hi guys, after we have released HTTP Net Header V-4.1,  it’s time for us to share the config for that tool also.

This Config works for Luna only  !!! And the region is Jabar. (West Java) – Indonesian ISP.
You must Read the Notes for detailed information or tutorial to use the config.

Here are some of the config.

and you can download them at here:

Luna – Jabar ^ HNH V-41.rar

If you need the tool, you can find here
If you found any difficulties, you may read this article: here and here

HNH Config – Luna No Jabar +

Hi guys, after we have released HTTP Net Header V-4.1,  it’s time for us to share the config for that tool also.

This Config works for Luna only  !!!
You must Read the Notes for detailed information or tutorial to use the config.

Here are some of the config.

and you can download them at here:

Luna – No Jabar +.rar

If you need the tool, you can find here
If you found any difficulties, you may read this article: here and here

Information for All User !!!

GlobalSSH site use save chace method on her system. It will cause site more responsif when loaded.
But, any news updates will not shown as usually. So if you want to see news Update from GlobalSSH site please Reload or refresh your page first.

How to do that?
– Right Click –> Reload
– Click Reload button on your Browser

Share Config Luna – No Jabar for HTTP Net Header V-4.1

Hi guys, after we have released HTTP Net Header V-4.1,  it’s time for us to share the config for that tool also.

This Config works for Luna only  !!!
You must Read the Notes for detailed information or tutorial to use the config.

 

Here are some of the config.

and you can download them at here:

Luna – No Jabar ~.rar

Mirror Link :

Luna – No Jabar ~.rar

If you need the tool, you can find here
If you found any difficulties, you may read this article: here and here

HTTP Net Header v-4.1 for PC


====================================================
Mode:
# Inject only (Uncheck use SSH)
# Inject + Tunnel (Plink + Bitvise)
# Tunnel Only (Check Direct Connection)

=================================
Features

# Multi Login SSH (max 2)
# Manual Payload
# Generator Payload
# Support until 2 Split
# Save and Load ( Lock with antisniffer and Unlock : payload, proxy, host, user )
# Auto Load Default Config ( Lock and Unlock )
# Config Extension ( .hnh )
# Replacer Manual & Auto Replace
# Show Log SSH dan Payload REspon
# Minimize to tray
# 2 Type Forwarding ( Proxifier or Socks5 on 1080 )
# 2 Type Proxifier ( Portable or System )
# Show Download and Upload meter
# Show Local IP
# Auto Route & manual route
# Various Theme
# Supported Indonesian & English Language

What’s Update?

# Rotate up to 5 bug
# Add Log for Bitvise
# Fix Back menu on Export
# Re-new some interface
# Fix Upstream Proxy (Use as Listen Port inject Also)
# Fix Split mode up to 3x split

===============================
Supported Command on Payload

# [netData] = CONNECT [host_port] [protocol]
# [raw] = CONNECT [host_port] [protocol]
# [real_raw] = CONNECT [host_port] [protocol][crlf][crlf]
# [host] = Destination host
# [port] = Destination port
# [host_port] = Destination host and port, seperated by colon :
# [ssh] = same as [host_port]
# [protocol] = HTTP protocol version
# [method] = default set is CONNECT
# [cr] = Carriage Return, U+000D
# [lf] = Line Feed, U+000A
# \r = same as CR
# \n = same as LF
# #13 = same as CR
# #10 = same as LF
# [crlf] = CR (U+000D) followed by LF (U+000A)
# [lfcr] = LF (U+000A) followed by CR (U+000D)
# [ua] = User Agent
# [instant_split] = request 1 -> request 2
# [split] = request 1 -> delay -> request 2
# [delay_split] = request 1 -> more delay -> request 2
# [repeat_split] = request 1 + request 1 -> request 2
# [reverse_split] = request 1 + request 2 -> request 2
# [split-x] = request 1 + request 2 -> delay -> request 2
# [x-split] = request 1 + request 2 -> request 2

==========================
Method Payload
——————–
Normal = CONNECT [host_port] [protocol][crlf]Host: domain.com[crlf][crlf]
Front Inject = GET http://domain.com/ HTTP/1.1[crlf]Host: domain.com[crlf][crlf]CONNECT [host_port] [protocol][crlf][crlf]
Back Inject = CONNECT [host_port] HTTP/1.1[crlf][crlf]GET http://domain.com/ [protocol][crlf]Host: domain.com[crlf][crlf]
Front Query = CONNECT domain.com@[host_port][crlf]GET http://domain.com/ [protocol][crlf]Host: domain.com[crlf][crlf]
Back Query = CONNECT [host_port]@domain.com[crlf]GET http://domain.com/ [protocol][crlf]Host: domain.com[crlf][crlf]
blue font will appear on command when payload is supported by this application..

please explore the payload by yourself 🙂

==============================================================
How to use


Portable Version

# download HTTP Net Header
# extract HTTP Net Header in the same folder
# open HTTP Net Header

Installer Version
# download HTTP Net Header
# Install HTTP Net Header
# Done

 

————————————————————

Where is your config being saved??
# You can found it at folder:
HNH\JGJ\Data\

WARNING!!!
Don’t changed or modified our folder and application, it may cause application not working properly..
You can modify Data only which contain HNH config.

Link Download here.