HTTP Net Header V-4.2 GlobalSSH

By | October 26, 2017


====================================================

What’s New?
# Add Dialler and IP hunter
# Add menu log plink
# Add menu Restart Plink and Bitvise
# Add menu Install and remove Tap adapter
# Add Tun2Sock Forwarder
# Add Feature No-Proxy System
# Add Brazil (portugis) Language
# Re – new some interface on text
# Add Start-time Tool duration
# New System Encrypt Config
# New System on Load and Save Config ( You can load config without import, just click your config twice or open With this tool)


Mode:

# Inject only (Uncheck use SSH)
# Inject + Tunnel (Plink + Bitvise)
# Tunnel Only (Choose Direct Connection bitvise/Plink)

Features:
# Multi Login SSH (max 2)
# Manual Payload
# Generator Payload
# Support until 2 Split
# Save and Load ( Lock with antisniffer and Unlock : payload, proxy, host, user )
# Auto Load Default Config ( Lock and Unlock )
# Config Extension ( .hnh )
# Replacer Manual & Auto Replace
# Show Log SSH dan Payload REspon
# Minimize to tray
# 2 Type Forwarding ( Proxifier or Socks5 on 1080 )
# 2 Type Proxifier ( Portable or System )
# Show Download and Upload meter
# Show Local IP
# Auto Route & manual route
# Various Theme
# Supported Indonesian & English Language
# Rotate up to 5 bug
# Upstream Proxy (Use as Listen Port inject Also)
# Split mode up to 3x split

Supported Command on Payload:
# [netData] = CONNECT [host_port] [protocol]
# [raw] = CONNECT [host_port] [protocol]
# [real_raw] = CONNECT [host_port] [protocol][crlf][crlf]
# [host] = Destination host
# [port] = Destination port
# [host_port] = Destination host and port, seperated by colon :
# [ssh] = same as [host_port]
# [protocol] = HTTP protocol version
# [method] = default set is CONNECT
# [cr] = Carriage Return, U+000D
# [lf] = Line Feed, U+000A
# \r = same as CR
# \n = same as LF
# #13 = same as CR
# #10 = same as LF
# [crlf] = CR (U+000D) followed by LF (U+000A)
# [lfcr] = LF (U+000A) followed by CR (U+000D)
# [crlf*1] = [crlf]
# [crlf*2] = [crlf] [crlf]  (until crlf*4)
# [ua] = User Agent
# [instant_split] = request 1 -> request 2
# [split] = request 1 -> delay -> request 2
# [delay_split] = request 1 -> more delay -> request 2
# [repeat_split] = request 1 + request 1 -> request 2
# [reverse_split] = request 1 + request 2 -> request 2
# [split-x] = request 1 + request 2 -> delay -> request 2
# [x-split] = request 1 + request 2 -> request 2

Method Payload:

Normal = CONNECT [host_port] [protocol][crlf]Host: domain.com[crlf][crlf]
Front Inject = GET http://domain.com/ HTTP/1.1[crlf]Host: domain.com[crlf][crlf]CONNECT [host_port] [protocol][crlf][crlf]
Back Inject = CONNECT [host_port] HTTP/1.1[crlf][crlf]GET http://domain.com/ [protocol][crlf]Host: domain.com[crlf][crlf]
Front Query = CONNECT domain.com@[host_port][crlf]GET http://domain.com/ [protocol][crlf]Host: domain.com[crlf][crlf]
Back Query = CONNECT [host_port]@domain.com[crlf]GET http://domain.com/ [protocol][crlf]Host: domain.com[crlf][crlf]

please explore the payload by yourself 🙂

ScreenShot:



How to use ?
– Installer Version
# download HTTP Net Header Setup
# Install HTTP Net Header
# Fill the password ( You can get the password after click ads on our website then contact our admin on link below )
# Done




Where is your config being saved??
# You can found it at folder:
Install Folder\HNH\Data\

WARNING!!!
– Don’t changed or modified our folder and application, it may cause application not working properly.
– You can modify Data only which contain HNH config.
– In this version you can’t load config from older version.
– Don’t forget to run as administrator
– Usually direct open config from drive C:system will appear error popup when you aren’t administrator. So try to run admin, or try to move config to another drive.
– Time tun2sock to sucesfully forward the connection depend on your system, just wait and check with cmd pinger or other to know connection succesfully connected or not.

Download:


Link Download here.

If you need password you can get it by send message to us on our Fanspage here.

12 thoughts on “HTTP Net Header V-4.2 GlobalSSH

  1. faisal

    Min saya tanya kalo pakek modem wifi model huawei E5573 bisa gak injeck vidio max tsel sekian
    #Help

    Reply
    1. admin Post author

      bisa saja..
      gunakan [G] SSl injector , isi hostnya sesuai paket anda. 🙂

      Reply
  2. hector

    i tried using the tun2socks forwarder , it connected but i cant browse with any of my browser…

    Reply
  3. Aiden

    If we do a thing good away from compassion or love, that may also create karma, however in a good direction. This
    could be work change, if you should have a very baby, or perhaps whether or
    not to marry someone or not. It is not uncommon to listen to these words and come across a subject
    matter at regular intervals about fortune telling.

    Reply
  4. gasi

    min ini bisa buat free wifi ga sih? seperti app annonytun buat android? konek lewat wifi yg ada disekitar. yg harusnya wifi harus login dulu/beli voucher baru bisa di pakai. tp kalo pake annony jd bisa gratis gitu

    Reply
    1. admin Post author

      bisa asal tau celahnya 🙂 .
      sebagai contoh, speedy yang sedang off langganan paket. tetapi masih ada halaman login yang ada celahnya. dengan disesuaikan(entah bagaimana), maka tidak perlu untuk login/beli paket. 🙂

      Reply
  5. alessandrokan1

    muito bom mas vocês poderiam colocar nele aquele modo igual do injector para celular ,o modo direct payload sem precisar de proxy ,ai ficaria ótimo.

    Reply

Leave a Reply

Your email address will not be published.