Monthly Archives: March 2017

Password of HNH Config – Luna Jabar (N)

For now, we will explain more about GlobalSSH. Actually,  GlobalSSH not only have a site on www.globalssh.com. We also have a blog at www.globalssh.com/blog. What’s the difference?  In GlobalSSH site,  we just share SSH, VPN, SQUID and our Tool (HTTP Net Header) without the tutorial how to create account, how to use the tool, etc. But in this blog we share it. We share tutorial or tips which related with GlobalSSH site, how to use our tool or config that we share, or anything which related with internet free.

As you read above, the title of this post is “Password of  HNH Config – Luna Jabar (N)” .
It’s mean this post contain password for those config. So, where you can found the password?

You can found the password on this post of course. But the location of our password exactly, that’s you have to see carefully. It’s not difficult actually, because we will give you the hint of our password location. First, you have to find some texts that we give Bold pattern. Do you understand? Remember, we will share password in random position of this page. But we give signal by giving bold pattern on the texts.

When you search the password from us, whether is tool or config, you must click the title which relevant with the name of the file. It will be easier to find the password when you remember what is the name of your file that need a password, such as [email protected]

If you found that our tool or config did not working properly, you can contact us in here . We’re sorry, all of our tools and config which provided on this site must use password  or sometimes we have to use HWID.   We did it to avoid reupload or reshare tools and config from GlobalSSH.

HNH Config – Luna Jabar (N)

Share Config for HTTP Net Header R4

Hi guys, after we have released HTTP Net Header R4 yesterday,  it’s time for us to share the config for that tool also.

This Config works for Luna only  !!!
You must Read the Notes for detailed information or tutorial to use the config.

 

 

 

Here are some of the config.

 

 

 

and you can download the Config at here:

Luna – Jabar (N).zip

If you need the password, you can find here
If you found any difficulties, you may read this article: here and here

[G] Eksis Injector V-2.1

This tool is equipped with specific tutorials which make your connection is unlimited.  Our tool has been tested before.  We are sorry if there are no successful use of our tools. We just want to share. There is no risk of using tools from us, but if anything, the risk is only a matter of success or not success of his course using our tools.

This tool includes some hosts, including: Eksis Zero and Eksis KZL (Chat-Socmed) for jabar. Probably, work for Eksis Non Jabar also.  Just try it one by one which host that work in your location. This inject support for SSH and VPN. It’s also support original proxy or squid proxy.  For now, these inject just work for our account from GlobalSSH only.  You can’t use this inject with another account from another SSH Provider.  🙂

When you are finished extracting this file, please read our notepad first (readme.txt).  You can found important information about this inject in our notepad.  So, don’t forget to read our notepad first which included in this file. When you open this inject, please see the tutorial tab. It may help you when you want to use this inject. Our default listen port is 100. Our entire tools has been set like that. You must remember it to avoid wrong setting.

Screenshot Tool:

 

 

 

Screenshot VirusTotal:

 

 

 

We’re sorry, all of our tools which available on this site, have to use a password rar or HWID.  We have a purpose why we have to do this.  It does because, we don’t want this inject being reupload on another site.

How to get the password or HWID?
If you want to know about the password or HWID of this inject, you can contact us via facebook message to this account: fb.me/dikaputrileo.      We have to say sorry if we can’t reply your message shortly after your message sent to us.  We can’t online in facebook for 24 hours of course.  But, we promise we’ll reply all of the message which sent to us.

Below are the download link for this tool:
[G] Eksis Injector V-2.1

MMD – Mini Mobile Data : Soeb Uzumaki (Soebish)

MMD (Mini Mobile Data) is a portable application as an alternate of modem’s default application,  so the user feel easy to use it because you don’t need to install this apllication first. The function of this application is quite a lot and some of them are moving signal edge to 3G, the signal quality which precise and accurate, showing the data transfer speed, changes APN if you need it, accessing sim card services such as check balances, auto-dial if the connection is lost and many more.

 

 

Features:

  • Suport Device : Huawei, Sierra, ProLink, ZTE
  • Dialler
  • Traffich Graph
  • Unlock Modem
  • USSD
  • Device Info
  • SMS
  • Routing
  • Auto Route
  • Auto Reconnect
  • Display MCC, MNC, LAC, CELL ID
  • Skin and New GUI

 

Notes:
1. For those who want to use a proxy that different with included in this tool, please write your proxy in auto route column
2. Please Wait approximately 5-10 seconds if QOS is not appear.
3. Press the Refresh button if some of Diagnostics Info doesn’t appear
4. To change the position of Programs, click and hold on Signal bar section.
5. If you want to activate Minimize, Minimize to Tray and Close feature, please right click on Signal Bar section
6. For those who want to change the color of Traffic Graph, click the letter “D” and “U”
7. For those who want to unlock your modem, click the direction of the arrow in lower right corner to open the modem Unlock tab, and then click the padlock icon. How to unlock?
• Click Get IMEI button
• Click the Get Code
• Click the Unlock button, wait until the process is complete. If your unlock process is success go to Diagnostics Tab, click the Detect Device button or Refresh
8. If MMD unable to detect your modem, you should set on your device Name column section like this:
Unknown (COM36)
The letter “U” should be capitalized. “COM36” is Port of your modem. Ypu should go to device manager first, to know your modem’s port. Then press Set
9. Don’t forget to run as admin when you open this program

 

About MMD:

1. MMD X also can show your modem’s temperature. But works for some device only.

 

2. MMD X can show your download speed, upload speed, and also total of your connection. You can simply monitor your connection with this application

 

3. You can see your stability when you are in download process or upload process. Just turn this feature on the dialer menu by checklist it to show your graph and uncheck it to turn off this feature

 

4. On USSD menu, there are some dials that have been planted in the program (works in Indonesia only), making it easier for users especially for Indonesian. Just select which one that you want to dial and then click send

5. MMD-X is equipped with Skin. You can change the appearance with colors and different skins, depending on with your taste. Go to about, and then press change skin button

15. If you want to use MMD, there’s one more thing that must be considered. Make sure the built-in application such as mobile partner (Huawei) has been closed before running MMD. You can’t running it together, because there’s a port that can used by one application only. In addition, you must first create a profile dial up connection.

 

Download Link:
Bellow is the download Link for MMD:
MMD X (Return)
or you can try older version of MMD :
MMD V1-4 Beta Version

 

S2T – Sock2Tap – Sock to Tap : mikodemos project

Sock to tap V3 include into mikodemos project. Many applications that have similar function and system like sock to tap. One of them is tun2sock. Both applications require tap adapters.  So, when you are running this program for the first time, Sock to tap will need your approval to add tap adapter in your PC. The other requirement to run this application is you should allow firewall network to tap adapters, and Run the program as an admin, because sock to tap requires admin access when this program running IP routing process and port forwarding.

ScreenShot1:

 

Sock to tap v3 is a tool that is very light and small to switch the default internet connection, especially for socks connection (SSH). This application has the same function with VPN. However, the connectivity which used by Socktotap using Socks taken from SSH port setting. SSH users usually use this program as an alternate of proxifier. Sock to tap is different from proxifier from the ways of working, but the function is same. ProxIfier only redirects a network that is set by the user. But if you used sock to tap, you didn’t have to set before. So the system connection is automatically entered into sock network. This tool can also be used to playing online games and for anti-virus updates. Make sure your SSH is support UDP Protocol first, if you want to use this tool.

ScreenShot2:

 

Note:
Sock: listen port from active sock forwarder
Proxy: a proxy used to route connections, (proxy server)
DNS: an option to transfer the DNS of the Internet connection to tap connection adapter.

That’s all some information about sock to tap.
To see how to use this program, click here

And you can download this program here. You can Read the readme if this file need a password.

How to use [G] Luna Injector V-1.1, [G] Tunnel V-5.1 and Socks2Tap

As you may know, we have released [G] Luna Injector V-1.1 and [G] Tunnel V-5.1 before. Now, we will give you tutorial how to use those tools and combine it with Socks2Tap.  But to try  this tutorial you must run all of the tool as admin and allow your network firewall. And here it is:

1. Connect your modem via MMD. Remember, you should uncheck your default gateway and check route


2. Open [G] Luna Injector V-1.1.exe. If you doesn’t have [G] Luna Injector V-1.1 you can download the program here.
3. On tab Injek, choose your host. There is a column above host. You should fill it with proxy that same with your route setting on MMD. After you are finished all that we mentioned before, then click START


4. Open [G] Tunnel V-5.1. If you doesn’t have [G] Tunnel V-5.1 you can download the program here.
5. On the tab Home, you should choose your setting first. In tunnel mode, select plink or bitvise. In login mode, choose how much login that you want to apply with your account. Finally, in Forwarder Connection, choose Port 1080
6. Open open tab SSH Setting. Fill all of setting

• Host: fill with host or ip which you obtained from the SSH Provider
• Port: fill your SSH port (22, 443, 143, 80, etc)
• Username SSH: fill it with your username
• Password: fill it with your password (double click to see your password)

7. Click Start
8. Open Socks to Tap. If you doesn’t have Sock2Tap you can download the program here. Don’t forget to run as admin when you open this tool.
9. Time to fill the setting. In socks port, you should fill it with 1080. In Route, you should fill it with proxy that same with your setting in MMD and inject.


10. Click Start
11. If “Tap Adapter sukses Tersambung” shown in Socks2Tap that means you are success to use this tool


12. Done, Happy Browsing

For more detailed step you can see this video:

 

 

How to use [G] Luna Injector V-1.1 and [G] Tunnel V-5.1

As you may know, we have released [G] Luna Injector V-1.1 and [G] Tunnel V-5.1 before. Now, we will give you tutorial how to use those tools.  And here it is:

1..Open [G] Luna Injector V-1.1.exe

2.  On tab Injek, choose your host. There is a column above host. You can change it with another proxy or squid proxy. Check or uncheck route is optional. After you are finished all that we mentioned before, then click START

 

 

3. Open [G] Tunnel V-5.1

4. On the tab Home, you should choose your setting first. In tunnel mode, select plink or bitvise. In login mode, choose how much login that you want to apply with your account. Finally, in Forwarder Connection, choose between Proxifier Portable, Proxifier Systems, or Port 1080. What’s the difference?

Proxifier Portable

– For those who doesn’t install Proxifier on your PC, you should choose this forwarder

Proxifier Systems

– Proxifier System is intended for those who prefer a private setting. Of course, you should install Proxifier on your PC first, if you want to choose this option

Port 1080

– Port 1080 is intended for those who like to use tun2sock / sock2tap. By combining it with tun2sock application / sock to tap the forwarder will work like a VPN.

  1. Now, open tab SSH Setting. Fill all of setting

Host: fill with host or ip which you obtained from the SSH Provider

Port: fill your SSH port (22, 443, 143, 80, etc)

Username SSH: fill it with your username

Password: fill it with your password (double click to see your password)

  1. If you use this tunnel with our inject, you shouldn’t change anything in upstream proxy. It’s because our injector listen port is always 100.
  2. Save your setting first,, so you didn’t need to fill the setting again when you reopened this tunnel
  3. Click Start

  1. Done

[G] Tunnel V-5.1

Specifications:

  •  Type of tunneling mode: Bitvise and Plink

[G] Tunnel V-5.1 is an SSH tunneling application or SSH Launcher with two kinds of tunneling. There are Bitvise and Plink. Plink log and Bitvise log will be displayed in the application. You can found it at the panel in the Home. Normally, you have to see Bitvise log in white clouds that shown in the taskbar, but in this application you didn’t need to do that. You just need to see it on the Log Panel

  • Different login mode

[G] Tunnel V-5.1 up to 2 Login. That means, these applications can be used for SSH login or SSH tunneling up to 2 login with one username and password (multi login in one device). Multi login can be used in the launcher plink or Bitvise, but the success or failure multi login also depends on the SSH server settings.

  • Kinds of forwarder connection

   – Portable Proxifier

For those who doesn’t install Proxifier on your PC, you should choose this forwarder

   – System Proxifier

Proxifier System is intended for those who prefer a private setting. Of course, you should install Proxifier on your PC first, if you want to choose this option

           – Port 1080

Port 1080 is intended for those who like to use tun2sock / sock2tap. By combining it with tun2sock application / sock to tap the forwarder will work like a VPN.

  • Auto load on Startup

[G] Tunnel V-5.1 has Auto load feature. When you open this tunnel, you didn’t need to fill SSH account again. Of course you should save your setting into default first when you want to use this feature

  • Load

You can load your SSH config which you have been saved before

  • Save as Default

By clicking Save, your account will be saved as default setting

  • Save As

Save as used to save an account with a specific name, so you can store your backup account which different with your default setting

  • Hide to tray

This tool also support hide to tray feature

ScreenShot:

Information:

  • SSH Configuration:

Host: fill with host or ip which you obtained from the SSH Provider

Port: fill your SSH port (22, 443, 143, 80, etc)

Username SSH: fill it with your username

Password: fill it with your password (double click to see your password)

  • Proxy Setting:

Use upstream proxy: If you choose to check it, that means you want to use the proxy settings. But if you choose to uncheck it, that means you didn’t want to use a proxy or usually we called it with direct connection by SSH port.

Proxy: fill it with the proxy. You can fill it with 127.0.0.1 or just type localhost Port. You Fill it with listen port of inject that you used or another proxy server.

  • Operation:

Start: to start this tunnel according to your settings

Stop: to stop all processes that have been running

Load: load your config that you have been saved

Save: to save the settings. It also means that you make your current setting into default

Save as: save your another account which different with your default setting

Hide: hide to tray

Exit: quit from this tool

  • Progressing Log :

Log “6001 Connected” means ssh forwarding successfully connected on port 6001.

Log “6002 Connected” means ssh forwarding successfully connected on port 6002.

Log “1080 Connected” means ssh forwarding successfully connected on port 1080.

Log “……… Auth Failed” means there is an error in the user or password. Check again your username and password. Expired account may cause that log shown.

Log “……… .Denied” mean ssh failed to connect.

How To Use [G] Tunnel V-5.1?

We will write the tutorial in another post soon. 🙂
Please Come Back.

Download Link:

Click Here to download [G] Tunnel V-5.1

If you need the password, you can find here.

Password of [G] Tunnel V-5.1

For now, we will explain more about GlobalSSH. Actually,  GlobalSSH not only have a site on www.globalssh.com. We also have a blog at www.globalssh.com/blog. What’s the difference?  In GlobalSSH site,  we just share SSH, VPN, SQUID and our Tool (HTTP Net Header) without the tutorial how to create account, how to use the tool, etc. But in this blog we share it. We share tutorial or tips which related with GlobalSSH site, how to use our tool or config that we share, or anything which related with internet free.

 

 

As you read above, the title of this post is “Password of [G] Tunnel V-5.1” .
It’s mean this post contain password for those config. So, where you can found the password?

You can found the password on this post of course. But the location of our password exactly, that’s you have to see carefully. It’s not difficult actually, because we will give you the hint of our password location. First, you have to find some texts that we give Bold pattern. Do you understand? Remember, we will share password in random position of this page. But we give signal by giving bold pattern on the texts.

When you search the password from us, whether is tool or config, you must click the title which relevant with the name of the file. It will be easier to find the password when you remember what is the name of your file that need a password, such as www.globalssh.net

If you found that our tool or config did not working properly, you can contact us in here . We’re sorry, all of our tools and config which provided on this site must use password  or sometimes we have to use HWID.   We did it to avoid reupload or reshare tools and config from GlobalSSH.